亚洲(Asia ) | 中文(Chinese)

Magic Kit 11

Ordering Information

Line Drawings

Magic and Spirit Kit 11 Line Drawings
Heights
H Hs e1
mm inch mm inch mm inch
3 U 132.50 5.21 112.50 4.42 57.20 2.25
6 U 265.85 10.46 245.85 9.67 190.55 7.50
Depths
T t
mm inch mm inch
240 9.44 232.6 9.15
300 11.81 292.6 11.51
390 15.35 382.6 15.06
Air Flow
Depth M Air flow
mm inch mm inch mm2 sq. inch
240 9.44 186.8 7.35 28953 44.87
300 11.81 244.0 9.60 37638 58.33
390 15.35 333.2 13.11 52115 80.77

Back to top


Magic-Kit 11 (IEC 60297)


(Each part # includes 2 side panels, 2 front extrusions, 2 internal extrusions, 4 tapped strips (6 pcs. for 6U version), 2 insulating strips (for backplane, insulated mounting only); 4 pcs. for 6U version, 2 top / bottom covers - perforated, assembly material,EMC-gasket for front / side and1 double extrusion for 6U version only. Please note, rear panel must be ordered separately.)

Height
U
Width
HP
Backplane
Mounting
Depth
240 mm/9.44" 300 mm/11.81" 390 mm/ 15.35"
3 U 84 Insulated 11A131-6 11A132-6 11A133-6
84 Conductive - - 11A133-7
6 U 84 Insulated - 11A162-6
84 Conductive - 11A162-7 11A163-7
Rear Panel

(Each part # includes 1 rear panel. Please note, assembly material included in case.)


Height Description Part Number
3 U Rear panel 22-384
6 U Rear panel 22-684

Back to top

Adaptation Kit


(Each part # includes 2 internal extrusions, 2 tapped strips and 1 set of assembly material.)

Description 84 HP
Recessed mounting of single / double eurocards without front panels 11-530

Back to top

Edge Connector Extrusion

(Each part # includes 1 aluminum extrusion. Please note, assembly material must be ordered separately.)

Description 8 HP 18 HP 28 HP 42 HP 63 HP 84 HP
For edge connector, IEC 60603-2 66-147-40 66-147-41 66-147-42 66-147-63 66-147-65 66-147-52

Assembly Material

Description Part Number
Assembly material M2.5 (for 2 supplementary extrusions) 63-214

Back to top

Front Sub Division Vertical for 6U Assembly


(Each part # includes 1 divider extrusion front, 1 divider extrusion rear, 2 front extrusions, 2 internal extrusions and1 assembly material. Please note, tapped strips and card guides must be ordered separately.)
Nominal Width
6 U (c)
2 x 3 U (a) Part Number
IEC 60297
50 HP 32 HP 11-959-2
Tapped Strips for Front Extrusion
Scope of Delivery Description Part Number
1 pc. tapped strip M2,5 32 HP = 162.56 mm 61-463

Back to top

Horizontal Card Mounting Kit
(Each part # includes 2 divider extrusions front, 2 divider extrusions rear, 2 tapped strips M2.5, 8 round head screws M4 x 10 recessed, Torx, 4 slotted countersunk screws M4 x 10 recessed, 2 set screws for fixing of tapped strips M2.5 x 8,2 card guides 160mm - 4 pcs. for 8 HP version.)

Mounting height Usable height IEC 60603-2 Backplane Cover plate top* Cover plate bottom*
3U 20 HP 14-971-30 14-971-60 21N602-90 21N602-90

* Assembly material for cover plate see below

Front Panel Screws
(Each part # includes 1 set of 10 screws and screw retainer.)

Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8, with plastic screw retainer 63K159
Milled edge screws recessed M2.5x 11.3, with plastic screw retainer 63-159

Back to top

Mounting Chassis

(Each part # includes 1 mounting chassis and 1 set of assembly material - 4 earthing nuts, 4 screws M4 x 6.)

Chassis depth 80 mm
Frame Width A D Part Number
mm inch mm inch
84 HP 431.5 16.98 2.0 0.08 14-832-50
Chassis depth 140 mm
Frame Width A D Part Number
mm inch mm inch
84 HP 431.5 16.98 2.0 0.08 14-836-50

Back to top

EMC Contact Strips (Advanced EMC-level)

(Each part # includes 2 contact strips.)

For HP Length Part Number
84 424.2 mm 63-836-70

Back to top

Earthing Set
(Each part # includes 1 press-in threaded bolt M4, 2 serrated lock washers, 2 hexagonal nuts M4, 1 terminal clamp and 1 earthing symbol.)

Description Part Number
Earthing set according to EN VDE / SEV 63-174

Back to top

Card Guides 1-Slot

Card Thickness Card Depth Part Number
10 pcs.
mm inch mm inch
1.6 0.06 80 3.15 61-019
160 6.30 61-044
220 8.66 61-039
280 11.02 61-017
2.0 0.08 160 6.30 61-087
220 8.66 61-039
280 11.02 61-169
ESD Clips
Description Part Number
ESD clip front bottom/rear top 61-419-01
ESD clip front top/rear bottom 61-419-02

Back to top

Card Guides 7-Slot in 4 HP Steps, IEC

Card Thickness Card Depth Part Number
mm inch mm inch
1.6 0.06 160 6.30 61-076

Back to top

Aluminum Card Guides 1-Slot, 3 Parts, IEC

Card Depth Length Part Number
Aluminum
mm inch mm inch
160 6.30 112.5 4.43 66-122-20
220 8.66 172.5 6.79 66-122-21
280 11.02 232.5 9.15 66-122-22
340 13.38 292.5 11.51 66-122-23
400 15.74 352.5 13.87 66-122-24
- - 1350.0 53.15 66-122-14

End Feet

Description Part Number
1 Pair
End feet plastic, UL94 V-0 61-069
Card Guide Board-Retention Bar
Description Part Number
20 pcs.
Board-retention bar, zinc-plated steel 61-291

Assembly Material

Description Part Number
Cross recessed round head screw M3 x 4 5331-04
Torx cylinder head screw M3 x 4, size T10 5470-01

Back to top

Card Guides 1-Slot, IEEE
Card Depth Color Part Number
1 pc.
mm inch
160 6.30 black 61-950-01
160 6.30 red 61-950-03

Back to top

Card Guides 1-Slot, incl. mounted ESD-Components, IEEE
Card Depth Description Part Number
1 Pair
Part Number
5 Pairs
mm inch
80 3.15 1 pair top/bottom 61-949-02 61-949-02-1
Card Depth Description Part Number
1 pc.
mm inch
160 6.30 1 piece bottom 61-950-02
160 6.30 1 piece top 61-950-04

Back to top

Aluminum Card Guides 1-Slot, 3 Parts, IEEE
Card Depth Part Number
1 pc.
mm inch
160 6.3 66-452-20
220 8.66 66-452-25
280 11.02 66-452-30
340 13.38 66-452-35

End Feet

Color Part Number
1 Pair
Black 61-955-01
Red 61-955-03
End Feet Offset
Color Part Number
1 Pair
Pearl white 61-961-01

Back to top

Aluminum Card Guides 1-Slot, 3 Parts, IEEE

Card Depth Part Number
1 pc.
mm inch
160 6.3 66-453-20
220 8.66 66-453-25
280 11.02 66-453-30
340 13.38 66-453-35

End Feet

Color Part Number
1 Pair
Black 61-956-01

ESD Clips

Description Part Number
ESD clip front bottom/rear top 61-419-01
ESD clip front top/rear bottom 61-419-02
ESD Spring
Description Part Number
ESD spring 61-420

Coding Pins

Description Part Number
Grey 81-054-02
Dark red 81-054-06
Black 81-054-04

Back to top

Flat Front Panels for Sub Racks and Enclosures, Solid

(Each part # includes 1 flat front panel. Front panel screws must be ordered separately. Please note, 1 HP and 2 HP are divider extrusions, not flat panels.)

Width B Part Number
mm inch 128.7 mm / 3U 262.0 mm / 6U
2 HP 10.0 0.39 21N302 21N602
3 HP 15.2 0.59 21N303 21N603
4 HP 20.1 0.79 21N304 21N604
5 HP 25.2 0.99 21N305 21N605
6 HP 30.3 1.19 21N306 21N606
7 HP 35.3 1.38 21N307 21N607
8 HP 40.4 1.59 21N308 21N608
10 HP 50.6 1.99 21N310 21N610
11 HP 55.7 2.19 21N311 -
12 HP 60.7 2.38 21N312 21N612
14 HP 70.9 2.79 21N314 21N614
16 HP 81.1 3.19 21N316 21N616
20 HP 101.4 3.59 21N320 21N620
21 HP 106.5 4.19 21N321 21N621
28 HP 142.0 5.59 21N328 21N628
32 HP 162.3 6.38 21N332 -
42 HP 213.1 8.38 21N342 21N642
52 HP 263.9 10.38 21N352 21N652
63 HP 319.8 12.59 21N363 21N663
81 HP 411.3 16.19 21N381 21N681
84 HP 426.5 16.79 21N384 21N684
Front Panel Screws
Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8 with plastic screw retainer 63K159
Rounded head screws recessed M2.5 x 11.3 with plastic screw retainer 63-159

Back to top

EMC Filler Panel with EMC Gasket
(Each part # includes 1 EMC front panel including pressed-in centering pin and bushes M2.5. Please note, front panel screws and EMC gaskets must be ordered separately.)

Width Part Number
3U
Part Number
6U
4 HP 66-514-73 66-514-76
5 HP 66-515-73 66-515-76
6 HP 66-516-73 66-516-76
8 HP 66-518-73 66-518-76
9 HP 66-519-73 66-519-76
10 HP 66-520-73 66-520-76
12 HP 66-522-73 66-522-76
14 HP 66-534-73 66-534-76
EMC Gasket (Stainless Steel)
Height Part Number
3U 81-062-03
6U 81-062-06

Front Panel Screws

Description Part Number
1 pc.
Torx screw, M2.5 x 11.3, size T8 5443-08
Round head screw, cross recessed M2.5 x 12.7 61-287

Back to top

EMC Front Filler Panel without Gasket

(Each part # includes 1 front panel including press-fit bushes M2.5. Please note, front panel screws and spacers must be ordered separately.)

Description Part Number
3U
Part Number
6U
4 HP 21B304 -
10 HP 21B310 -
12 HP 21B312 -
16 HP 21B316 -
21 HP 21B321 -
42 HP 21B342 21B642
63 HP 21B363 -
84 HP 21B384 21B684
Front Panel Screws

(Front panel width up to 9 HP = 2 screws; ≥ 10 HP = 4 screws)


Description Part Number
Torx screw, M2.5 x 11.3, size T8 5443-08
Rounded head screw, cross recessed M2.5 x 12.7 61-287

Back to top

Spacer for EMC Flat Front Panels

(Each part # includes 1 spacer including gasket and 2 Torx sheet metal screws 2.9 x 6.5 - size T 10.)

Height Part Number
3U 81K023

Back to top

EMC Flat Front Panels

Advanced EMC Level
(Each part # includes 1 EMC flat front panel, contact angle including screws - 6U version only and EMC gasket for contact angle - 6U version only.)

Width Part Number 3U Part Number 6U
42 HP 21C342 -
63 HP 21C363 -
84 HP 21C384 21C684
Front Panel Screws

(Front panel width 42 HP = 4 screws,Front panel width 63 HP = 6 screws,Front panel width 84 HP = 8 screws)

Description Part Number 10 pcs.
Torx screws M2.5 x 11.3, size T8, with press-fit bush 63K480
Screw recessed M2.5 x 11.3, with press-fit bush 63-444
Screw cross recessed M2.5 x 12.7, with press-fit bush 63-480

Back to top

Superior EMC Level

(Each part # includes 1 EMC flat front panel, contact angle including screws, EMC gasket for contact angle and EMC gasket for front extrusion/front panel.)

Width Part Number
3U
Part Number
6U
42 HP 21D342 -
84 HP 21D384 21D684
Front Panel Screws
(Front panel width 42 HP = 4 screws,Front panel width 63 HP = 6 screws,Front panel width 84 HP = 8 screws)
Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8, with press-fit bush 63K480
Screw recessed M2.5 x 11.3, with press-fit bush 63-444
Screw cross recessed M2.5 x 12.7, with press-fit bush 63-480

Back to top

Fan Front Panel for Horizontal Ventilation

(Each part # includes 1 perforated fan front panel. Please note, front panel screws must be ordered separately.)



Height Width Air Passage Part Number
mm2 sq. inch
3U 8 HP 3195 4.95 21N308-01
12 HP 4793 7.42 21N312-01
Front Panel Screws

(Each part # includes 1 set of 10 screws with screw retainers. Please note, fan front panel width up to 84HP = 2 screws≥ 12 HP = 4 screws.)

Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8 with plastic screw retainer 63K159
Rounded head screws recessed M2.5 x 11.3 with plastic screw retainer 63-159

Back to top

Fan Front Panels for Direct Fan Mounting

(Each part # includes 1 perforated fan front panel. Please note, front panel screws and assembly material must be ordered separately.)

Description Height Width Air passage Part Number 1 pc.
mm2 sq inch
Without switch opening 3U 20 HP 4051 6.27 21N320-04
Front Panel Screws
(Each part # includes 1 set of 10 screws with screw retainers. Please note, 4 screws are needed per front panel.)
Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8 with plastic screw retainer 63K159
Rounded head screws recessed M2.5 x 11.3 with plastic screw retainer 63-159
Assembly Material for Fan Mounting
Description Part Number
Countersunk screw, cross recessed M4 x 10 5342-10
Hexagonal nut M4, 0.8D 5620-51

Back to top

Top/Bottom-Hinged Front Panel
(Each part # includes 1 front panel, hinge extrusion and assembly material M2.5, including hinges.)
Width Part Number
3U
Part Number
6U
84 HP 25N384-19 25N684-19
Dimensions
Nominal Width Width B
HP mm inch mm inch
84 HP 426.72 16.80 426.5 16.79
Nominal Height Height H Height h
U mm inch mm inch
3 U 128.7 5.07 117 4.61
6 U 262.05 10.31 250.3 9.85

Back to top

EMC Top / Bottom-Hinged Front Panel
(Each part # includes 1 EMC front panel, 1 hinge extrusions and assembly material M2.5, including hinges and EMC gaskets.)

EMC Level Part Number
3U
Part Number
6U
Advanced 25C384-11 -
Superior - 25D684-11

Back to top

Side-Hinged Front Panel
(Each part # includes 1 front panel, hinge extrusion and assembly material M2.5 including hinges.)

Width Part Number
3U
Part Number
6U
84 HP 25N384-29 25N684-29

Dimensions

Nominal Width Width B Width b
HP mm inch mm inch mm inch
84 HP 426.72 16.80 426.5 16.79 414.3 16.31
Nominal Height Height H
U mm inch
3U 128.7 5.06
6 U 262.05 10.31

Back to top

Extruded Front Panels, without Openings

(Each part # includes 1 extruded front panel. Please note, front panel screws must be ordered separately.)

Width B Part Number
3U
Part Number
6U
mm inch
3 HP 15.0 0.59 26N303 26N603
4 HP 20.1 0.79 26N304 26N604
5 HP 25.2 0.99 26N305 26N605
6 HP 30.3 1.19 26N306 26N606
7 HP 35.3 1.38 26N307 26N607
8 HP 40.4 1.59 26N308 26N608
10 HP 50.6 1.99 26N310 26N610
12 HP 60.7 2.38 26N312 26N612
14 HP 70.9 2.79 26N314 26N614
16 HP 81.1 3.19 26N316 26N616
21 HP 106.5 4.19 26N321 26N621

Front Panel Screws
(each part # includes 1 set of 10 screws with screw retainer. Please note, front panel width up to 9HP = 2 screws;≥ 10 HP = 4 screws.)

Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8 with plastic screw retainer 63K159
Rounded head screws recessed M2.5 x 11.3 with plastic screw retainer 63-159

Back to top

Rigid-Mounted Handle with Identification Label

(Each part # includes 1 rigid-mounted handle with identification label. Please note, assembly material must be ordered separately.)

Width Scope of Delivery Part Number
4 HP 10 pcs. 60-200-04
5 HP 10 pcs. 60-200-05
6 HP 10 pcs. 60-200-06
7 HP 10 pcs. 60-200-07
8 HP 10 pcs. 60-200-08
10 HP 10 pcs. 60-200-10
12 HP 10 pcs. 60-200-12
14 HP 1 pc. 60-200-14

* Other sizes available (up to 84 HP) upon request

Assembly Material
Description Part Number
Cross recessed round head screw 61-276

Back to top

Fluted Handles for Front Panels to IEC

(Each part # includes extruded handles and assembly material.)

Front Panel Width Handle Length Part Number
mm inch mm inch
3 HP 15.0 0.59 12.5 0.49 60-103
4 HP 20.1 0.79 17.6 0.69 60-104
5 HP 25.2 0.99 22.6 0.88 60-105
6 HP 30.3 1.19 27.7 1.09 60-106
7 HP 35.3 1.38 33.5 1.31 60-107
8 HP 40.4 1.59 37.9 1.49 60-108
10 HP 50.6 1.99 48.0 1.88 60-110
12 HP 60.8 2.39 58.2 2.29 60-112
14 HP 70.9 2.79 69.1 2.72 60-114
16 HP 81.1 3.19 78.5 3.09 60-116
21 HP 106.5 4.18 104.6 4.11 60-121
30 HP 152.2 5.99 149.6 5.88 60-130
40 HP 203.0 7.99 200.4 7.88 60-140
60 HP 304.6 11.99 302.0 11.88 60-160
84 HP 426.5 16.79 424.0 16.69 60-184

Back to top

Front Panel with Cutout for IEC Ejector Handle

(Each part # includes 1 front panel. Please note, front panel screws and IEC ejector handles must be ordered separately.)



Width B Part Number
3U
Part Number
6U
mm inch
3 HP 15.0 0.59 26N303 26N603
4 HP 20.1 0.79 26N304 26N604
5 HP 25.2 0.99 26N305 26N605
6 HP 30.3 1.19 26N306 26N606
7 HP 35.3 1.38 26N307 26N607
8 HP 40.4 1.59 26N308 26N608
10 HP 50.6 1.99 26N310 26N610
12 HP 60.7 2.38 26N312 26N612
14 HP 70.9 2.79 26N314 -
16 HP 81.1 3.19 26N316 26N616
21 HP 106.5 4.19 26N321 -
Front Panel Screws (for 3U versions only)

(Each part # includes 1 set of 10 screws with screw retainers. Please note, 3U front panel = 1 screw.)

Description Part Number
10 pcs.
Torx screws M2.5 x 11.3, size T8, with plastic screw retainer 63K159
Rounded head screws recessed M2.5 x 11.3, with plastic screw retainer 63-159

Back to top

IEC Ejector Handles

(Each part # includes 1 handle and assembly material. Please note, labels must be ordered separately.)


Description Part Number
Ejector Handle - Black 81-233
Ejector Handle - Grey 81-234
Labels
Description Part Number
1 sheet A4 of 220 labels 81-031

Back to top

Front Panel with Cutout for IEC Ejector Handle

(Each part # includes 1 front panel. Please note, assembly material and handles must be ordered separately.)

Width B Part Number
3U
Part Number
6U
mm inch
4 HP 20.0 0.79 26N304-51 21N604-51
6 HP 30.2 1.19 - 21N606-51
8 HP 40.3 1.59 - 21N608-51
EMC Gasket - Stainless Steel
Height Part Number
3U 81-062-03
6U 81-062-06
Front Panel Screws

(Front panel width up to 8 HP = 2 screws)

Description Part Number
Torx screw, M2.5 x 11.3, size T8 5443-08
Round head screw, cross recessed M2.5 x 12.7 61-287

Back to top

Front Anodized, Rear Conductive (2 cutouts)

(Each part # includes 1 EMC front panel, including pressed-in bushes M2.5 - size ≥ 9 HP.)

Width Part Number
3U
Part Number
6U
Part Number
9U
4 HP 66-514-23 66-514-26 66-514-29
5 HP 66-515-23 66-515-26 -
6 HP 66-516-23 66-516-26 66-516-29
7HP 66-517-23 66-517-26 -
8 HP 66-518-23 66-518-26 66-518-29
9 HP 66-519-23 66-519-26 -
10 HP 66-520-23 66-520-26 66-520-29
12 HP 66-522-23 66-522-26 -
14 HP 66-534-23 66-534-26 -
Front Anodized, Rear Conductive (1 cutout)

(With 1 cutout - bottom.)


Width Part Number
3U
4 HP 66-514-43
5 HP 66-515-43
6 HP 66-516-43
8 HP 66-518-43
10 HP 66-520-43
12 HP 66-522-43
14 HP 66-534-43
Dimensions
Height L1 mm L1 inch L2 mm L2 inch L3 mm L3 inch
3 U 128.55 5.06 102.05 4.01 122.50 4.82
6 U 261.90 10.31 235.40 9.27 255.85 10.07
9 U 395.25 15.56 368.75 14.51 389.20 15.32
EMC-Gasket (Stainless Steel)
Unit Part Number
3U
Part Number
6U
Part Number
9U
1 pc. 81-062-03 81-062-06 81-062-09
Front Panel Screw
Description Part Number
ross recessed round head screws M2.5 x 12.7 61-287
Torx screws M2.5 x 11.3, size T8 5443-08

Back to top

Ejector Handle - IEC
(Each part # includes 1 handle.)
Description Part Number
Ejector handle black 81-233
Ejector handle grey 81-234
Label
Description Part Number
1 sheet A4 of 220 labels 81-031

Back to top

Card Holder without Swivel Stop
(Each part # includes 1 card holder. Please note, assembly material must be ordered separately.)
Description Application D Part Number
Card holder without swivel stop Without injector /ejector handle M2.5 61-156
Assembly Material
Description Application Part Number
Cross recessed counter screw M2.5 x 8 For card holder 5322-08
Torx countersunk screw M2.5 x 8, size T8 For card holder 5470-21
Slotted pan head screw M2.5 x 6 For printed board 5571-06
Torx cylinder head screw M2.5 x 6, size T8 For printed board 5470-04
Card Holder/End Piece without ESD Pin
Description Part Number
Top 81-018-01
Bottom 81-019-01

Back to top

IEEE Plug-In Units
Front Anodized, Side Conductive (2 cutouts)

(With 2 cutouts - bottom + top)

Width Part Number
3U
Part Number
6U
4 HP 66-514-23 66-514-26
5 HP 66-515-23 66-515-26
6 HP 66-516-23 66-516-26
7 HP 66-517-23 66-517-26
8 HP 66-518-23 66-518-26
9 HP 66-519-23 66-519-26
10 HP 66-520-23 66-520-26
12 HP 66-522-23 66-522-26
14 HP 66-534-23 66-534-26

Front Anodized, Rear Conductive (1 cutout)

(With 1 cutout - bottom)


Width Part Number
3U
4 HP 66-514-43
5 HP 66-515-43
6 HP 66-516-43
8 HP 66-518-43
10 HP 66-520-43
12 HP 66-522-43
14 HP 66-534-43

EMC-Gasket (Stainless Steel)

Unit Part Number
3U
Part Number
6U
1 pc. 81-062-03 81-062-06

Front Panel Screw

Description Part Number
Cross recessed round head screws M2.5 x 12.7 61-287
Torx screws M2.5 x 11.3, size T8 5443-08

Dimensions

Height L1 mm L1 inch L2 mm L2 inch L3 mm L3 inch
3 U 128.55 5.06 102.05 4.01 122.50 4.82
6 U 261.90 10.31 235.40 9.27 255.85 10.07

Back to top

IEEE Injector/Ejector Handles
Type Mounting ESD Pin Color Part Number
Ergonomic Bottom With ESD-pin Black 81-076
Ergonomic Top With ESD-pin Black 81-075
Ergonomic Bottom Without ESD-pin Black 81-076-01
Ergonomic Top Without ESD-pin Black 81-075-01
Ergonomic Hot Swap Bottom With ESD-pin Black 81-096
Ergonomic Hot Swap Top With ESD-pin Black 81-095
Ergonomic Hot Swap Bottom Without ESD-pin Black 81-096-01
Ergonomic Hot Swap Top Without ESD-pin Black 81-095-01
Ergonomic Hot Swap Offset Bottom With ESD-pin Black 81-185
Ergonomic Hot Swap Offset Top With ESD-pin Black 81-184
Classic Bottom With ESD-pin Black 81-261
Classic Top With ESD-pin Black 81-260
Classic Offset Bottom With ESD-pin Black 81-161
Classic Offset Top With ESD-pin Black 81-160
Classic Hot Swap Bottom With ESD-pin Black 81-256
Classic Hot Swap Top With ESD-pin Black 81-255
Classic Hot Swap Offset Bottom With ESD-pin Black 81-156
Classic Hot Swap Offset Top With ESD-pin Black 81-155
Telecom Hot Swap Bottom With ESD-pin Black 81-206
Telecom Hot Swap Top With ESD-pin Black 81-205
Telecom Hot Swap Bottom Without ESD-pin Black 81-206-01
Telecom Hot Swap Top Without ESD-pin Black 81-205-01
Telecom Hot Swap Offset Bottom With ESD-pin Black 81-189
Telecom Hot Swap Offset Top With ESD-pin Black 81-188
Telecom long Hot Swap Bottom With ESD-pin Black 81-215
Telecom long Hot Swap Top With ESD-pin Black 81-214
Telecom long Hot Swap Offset Bottom With ESD-pin Black 81-116
Telecom long Hot Swap Offset Top With ESD-pin Black 81-117
Microswitch 81-088
Microswitch 81-088-1 (10 pcs.)

Back to top

IEEE Card Holders
Card Holder/End Piece with ESD Pin
(Each part # includes 1 end piece card holder and assembly material.)
Description Part Number
Top 81-018
Bottom 81-019

Card Holder/End Piece without ESD Pin
(Each part # includes 1 end piece card holder and assembly material.)

Description Part Number
Top 81-018-01
Bottom 81-019-01

Back to top

Middle Part
Description A Part Number
mm inch
Aluminum 2.5 mm 2.5 0.10 61-960

Assembly Material

Description Part Number
PT-countersunk, 2.5 x 6 5534-06

Back to top

Coding Pins
Description Part Number
Grey 81-054-02
Dark red 81-054-06
Black 81-054-04

Back to top

Front Extrusions

Front Extrusion 66-665

(Each part # includes 1 extrusion without assembly material.)


Standard Version

Length
for HP
mm inch Part Number
clear passivated
84 431.8 17.00 66-666-53
Front Extrusion 66-666

(Each part # includes 1 extrusion without assembly material.)

Standard Version

Length
for HP
mm inch Part Number
clear passivated
84 431.8 17.00 66-666-53

Back to top

Front Extrusion 66-111, IEC
(Each part # includes 1 extrusion without assembly material.)

Standard Version

Length
for HP
mm inch Part Number
clear
anodized
black
anodized
clear
anodized
raw
21 111.8 4.4 66-111-26 - - -
28 147.3 5.8 66-111-25 - - -
32 167.6 6.8 66-111-62 - - -
42 218.4 8.6 66-111-60 - 66-111-75 -
63 325.1 12.8 66-111-61 - 66-111-76 -
81 416.6 16.4 66-111-22 - 66-111-77 -
84 431.8 17 66-111-23 66-111-56 66-111-78 -
1350.0 53.15 - - - 66-111-19
EMC Version
Length
for HP
mm inch Holes
n x C
Part Number
clear passivated
42 218.4 8.60 2 x 71.42 66-111-50
63 325.1 12.80 3 x 83.17 66-111-51
81 416.6 16.40 4 x 85.24 66-111-52
84 431.8 17.00 4 x 89.05 66-111-53

Height Divider Right
Length
for HP
mm inch Part Number
anodized
8.5 43.18 1.70 66-111-71
12.5 63.50 2.50 66-111-72
Height Divider Left
Length
for HP
mm inch Part Number
anodized
8.5 43.18 1.70 66-111-81
12.5 63.50 2.50 66-111-82

Back to top

Internal Extrusions

Internal Extrusion 66-193 for Insulated Backplane Mounting

(Each part # includes 1 extrusion without assembly material.)

Standard Version
Length
for HP
mm inch Part Number
clear passivated raw
32 167.6 6.60 66-193-26 -
42 218.4 8.60 66-193-20 -
63 325.1 12.80 66-193-21 -
81 416.6 16.40 66-193-22 -
84 431.8 17.00 66-193-23 -
1350.0 53.14 - 66-193-19
EMC Version
Length
for HP
mm inch Part Number
clear passivated
84 431.8 17.00 66-193-63
Internal Extrusion 66-194 for Conductive Backplane Mounting
(Each part # includes 1 extrusion without assembly material.)

Standard Version

Length
for HP
mm inch Part Number
clear passivated raw
84 431.8 17.00 66-194-23 -
1350.0 53.14 - 66-194-19

Back to top

Double Extrusions

Double Extrusion 66-192 for Insulated Backplane Mounting
(Each part # includes 1 extrusion without assembly material.)

Length
for HP
mm inch Part Number
clear passivated raw
84 431.8 17.00 66-192-24 -
1350.0 53.14 - 66-192-14
Length
for HP
mm
inch
Part Number
clear passivated
42 213.4 8.40 66-192-20
63 320.0 12.59 66-192-21
81 411.5 16.20 66-192-22
84 426.7 16.79 66-192-23

Assembly material with adapter: 63-175

Back to top

Double Extrusion 66-195 for Conductive Backplane Mounting
Length
for HP
mm inch Part Number
clear passivated
84 431.8 17.00 66-195-24
Length
for HP
mm inch Part Number
clear passivated
81 411.5 16.20 66-195-22
84 426.7 16.77 66-195-23

Assembly material with adapter: 63-175


Back to top

Insulating Strip 66-901

Length
for HP
mm inch Part Number
42 216.44 8.52 66-901-20
63 323.12 12.72 66-901-21
81 414.56 16.32 66-901-22
84 429.80 16.92 66-901-23
Mounting with Insulation Strip
Description Part Number
Cross recessed cylinderhead earthing screw M2.5 x 12 5325-12

Back to top

Edge Connector Extrusion 66-147

(Each part # includes 1 extrusion without Assembly Material.)


Length
for HP
mm inch Part Number
clear passivated raw
8 40.6 1.59 66-147-40 -
18 91.4 3.59 66-147-41 -
28 142.2 5.60 66-147-42 -
42 213.4 8.40 66-147-63 -
63 320.0 12.60 66-147-65 -
81 411.5 16.20 66-147-22 -
84 426.7 16.80 66-147-52 -
1350.0 53.14 - 66-147-19

Back to top

我们使用cookies确保您在我们的网站上获得最好的体验, 并学到更多