|
|
|
ATCA Ergonomic Handles
The injector and ejector handle stands out with its ergonomic design.
It guarantees the proper release and locking of the plug-in unit, confirming this with a clearly audible and positive click.
|
|
•
|
Self-locking screws for front panel and board mounting
|
|
•
|
Plastic parts black (UL 94 V-0)
|
|
•
|
Base part including alignment pin
|
|
•
|
Retaining screw pre-assembled
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IEEE Injector/Ejector Handles
A variety of different IEEE injector/ejector handle types for hot-swap or non-hot-swap operation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IEC Ergonomic Handles
Simplify your operations with the new ergonomic IEC ejector handle.
|
|
•
|
Straightforward and shorter, error free assembly of the plug-in units
|
|
•
|
Use of standardised front panels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fluted Handles
Extruded aluminium handles, shaped to facilitate withdrawal of plug-in units, size up to 84 HP
|
|
•
|
Two grooves in the front face will accept identification strips (0.5 x 9 mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rigid-Mounted Unit Handles
Plastic handles with aluminium identification labels
|
|
•
|
Handles are fixed to the front panels using self-tapping, self-centring screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IEEE Plug-In Units
Front panels, handles and accessories to build up plug-in units acc. to IEEE-mechanic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IEC Plug-In Units
Front panels, handles and accessories to build up plug-in units acc. to IEC-mechanic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front Panels for Sub Racks and Enclosures
A variety of different flat front panels.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Sink Front Panels
Cooling elements as front or rear panel in the 19-inch technology
|
|
•
|
For sub racks and enclosures
|
|
•
|
Cooling fins in pitch of 1.5 HP
|
|
•
|
Aluminium anodised or clear passivated
|
|
•
|
EMC version with mounted brackets for slid in of EMC gaskets
|
|
•
|
Thermal resistance see datasheet
|
|
•
|
Customised versions on request
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PMC Mezzanine Front Panels
Acc. to IEEE 1386
|
|
•
|
Used on VME-, Future, CPCI- or MultibusII-Boards when additional interfaces are needed
|
|
•
|
Two designs are availabe: Zinc die-cast or aluminium extrusion
|
|
•
|
Mezzanine filler panel: To cover the unused Mezzanine cut outs. The filler panels are simply cliped into the cut-outs.
|
|
•
|
The EMC-gaskets can be inserted into the groove of the front panels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cassettes & Modules
|
|
•
|
For One Eurocard and Bulky Components
|
|
|
|
|
|
|
|
|
|
|
|
|
|