Elma Electronic Germany English Backplanes, CompactPCI, CompactPCI Extender board (160mm)

Elma > Germany > CompactPCI Extender board (160mm)

CompactPCI Extender board (160mm)
	The cPCI extender board supports the testing of daughter boards. It is plugged into the backplane in the slot for the daughter board. The daughter board is plugged onto the extender board outside the card cage, making it more easily accessible.

To test peripheral cPCI boards
8-layer construction
Compliant with PICMG 2.0 CompactPCI Specification Rev.3.0
cPCI signals from P1 and P2 extended using PCI to PCI Bridge
Based on the Intel PCI-to-PCI bridge fw21154be
Bus frequency: 33MHz (standard) or 66MHz
Access to GND, +3.3V, +5V, +12V, -12V via fastons
VI/O voltage selectable between +3.3 and +5V
All pins from P3, P4 and P5 are routed 1:1
Signals can be individually switched on/off via SMD switches
Characteristic impedance 65 Ohm +/-10%
Handles for insertion/extraction of the daughter card
Two test points for each signal
Table in Silkscreen showing the mapping of signals

Datasheet/Brochure

	Data sheet
	Manual

More Info/Accessories

Master drawing

Product Configurator
The Product Configurator allows you to build your own configuration from our standard product line. Simply configure your specific product by selecting the attributes below. The system will auto-configure when only one option is available, and stops when an attribute has multiple options -- requiring you to make a selection. Make your selection each time the Product Configurator stops, and the box is highlighted red. Once the configuration is complete, select "Continue".

Please note these are our most common standard products only, if you have a custom application or need a configuration that does not appear below, contact our sales team.

Clock frequency
Bus widht
PCB hight
PCB thickness
PCB depth

Please, make a selection from the left.