|
CompactPCI Extender board (160mm)
The cPCI extender board supports the testing of
daughter boards. It is plugged into the backplane in the slot for the daughter board. The daughter board is
plugged onto the extender board outside the card cage, making it more easily accessible.
|
|
•
|
To test peripheral cPCI boards
|
|
•
|
Compliant with PICMG 2.0 CompactPCI Specification Rev.3.0
|
|
•
|
cPCI signals from P1 and P2 extended using PCI to PCI Bridge
|
|
•
|
Based on the Intel PCI-to-PCI bridge fw21154be
|
|
•
|
Bus frequency: 33MHz (standard) or 66MHz
|
|
•
|
All pins from P3, P4 and P5 are routed 1:1
|
|
•
|
Signals can be individually switched on/off via SMD switches
|
|
•
|
Characteristic impedance 65 Ohm +/-10%
|
|
•
|
Handles for insertion/extraction of the daughter card
|
|
•
|
Two test points for each signal
|
|
•
|
Table in Silkscreen showing the mapping of signals
|
|
•
|
Access to GND, +3.3V, +5V, +12V, -12V via fastons
|
|
•
|
VI/O voltage selectable between +3.3 and +5V
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Configurator
The Product Configurator allows you to build your own configuration from our standard product line. Simply configure your specific product by selecting the attributes below. The system will auto-configure when only one option is available, and stops when an attribute has multiple options -- requiring you to make a selection. Make your selection each time the Product Configurator stops, and the box is highlighted red. Once the configuration is complete, select "Continue".
Please note these are our most common standard products only, if you have a custom application or need a configuration that does not appear below, contact our sales team.
|
|
|
Clock frequency
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Talk to a Sales Engineer |
 |
Do you need a customized solution or have a question?
Elma’s sales engineers can confirm that the product you selected is
best-suited for your needs and help define specific configurations and
ordering options.
|
|