|
|
|
CompactPCI 3U
ELMA's cPCI backplane family covers a wide range of options to connect all available PSUs versions. Up to 5 slots can be offered with a clock frequency of 66 MHz. The stable operation of your system can be monitored using ELMA's System Monitor that continuously measures internal chassis parameters indicated healthy by LEDs.
Two or three cPCI backplanes (10 to max 21 slots) can be linked using the ELMA's cPCI Bridge module on the rear.
|
|
•
|
Compliant with PICMG 2.0 R3.0 CPCI Core Specification
|
|
•
|
System slot right or left
|
|
•
|
Shrouds: P2 (only for 32 bit Backplanes)
|
|
•
|
2 slot 8-layer construction; 3-8 slot 10-layer construction
|
|
•
|
10-21 slots available with cPCI to cPCI Bridge
|
|
•
|
Connector for status signals "FCON"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CompactPCI 6U
ELMA's cPCI backplane family covers a wide range of options to connect all available PSUs versions. Up to 5 slots can be offered with a clock frequency of 66 MHz. The stable operation of your system can be monitored using ELMA's System Monitor that continuously measures internal chassis parameters indicated healthy by LEDs. Two or three cPCI backplanes (10 to max 21 slots) can be linked using the ELMA's cPCI Bridge module on the rear.
|
|
•
|
Compliant with PICMG 2.0 R3.0 CPCI Core Specification
|
|
•
|
System slot right or left
|
|
•
|
Shrouds: P3 to P5; P2 to P5 (only for 32 bit Backplanes)
|
|
•
|
2 slot 8-layer construction; 3-8 slot 10-layer construction
|
|
•
|
10-21 slots available with cPCI to cPCI Bridge
|
|
•
|
Connector for status signals "FCON"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CompactPCI 9U (horizontal)
The 9U cPCI family is optimised for use in a horizontal system platform (2U, 3U and 4U). Pluggable PSUs minimises cabling and reduce costs.
|
|
•
|
Compliant with PICMG 2.0 R3.0 CPCI Core Specification
|
|
•
|
Connector for status signals "FCON"
|
|
•
|
Power input: pass through crimp contacts AWG 14-16 (enclosed)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CompactPCI with H.110 bus
A key element in the development of computer-based communications equipment has
been the addition of an telecom bus to existing
cPCI Backplanes on the J4/P4 CompactPCI connector location.
The objective of this CT Bus specification is to provide
a single telecom bus for the entire industry.
|
|
•
|
Compliant with PICMG 2.0 R3.0 CPCI Core Specification
|
|
•
|
Compliant with PICMG 2.5 R.1.0 Computer Telephony Specification
|
|
•
|
System slot can be isolated from H.110-bus (6 and 8 slot only)
|
|
•
|
Shrouds: P3 to P5; P2 to P5
|
|
•
|
Number of slots: 4, 6, 8 (others on request)
|
|
•
|
Connector for status signals "FCON"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CompactPCI with Bridge
Up to three 64 bit backplanes can be connected together
with the bridge. Therefore the number of slots can be
increased up to 21 slots. No slots are occupied by the
bridge module.
|
|
•
|
In combination with Elma standard cPCI backplanes only
|
|
•
|
Bridge module for the rear side of the backplane (pluggable)
|
|
•
|
Supports +3.3 V or +5 V input (onboard voltage regulator)
|
|
•
|
Provides 7 clock signals for the secondary backplane
|
|
•
|
Based on the Intel PCI-to-PCI bridge
|
|
•
|
Automatic detection 32/64 bit systems
|
|
•
|
PCB height: 128.7 mm (3 U); 262.05 (6U)
|
|
•
|
PCB thickness: 3.2 mm (3 U); 4.4 mm (6 U)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cPCI with Low Profile Bridge
ELMAs Low Profile Bridge is the ideal solution for all 32 bit applications. The bridge covers the P1 area only without interfering the rear transition modules.
|
|
•
|
All I/O positions can be used for Rear Transitions Modules
|
|
•
|
In combination with Elma standard cPCI backplanes only
|
|
•
|
Rear pallet module, low profile construction (pluggable)
|
|
•
|
Right to left extension of CPCI bus segments
|
|
•
|
All slots available on the front for cards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CompactPCI Extender board (160mm)
The cPCI extender board supports the testing of
daughter boards. It is plugged into the backplane in the slot for the daughter board. The daughter board is
plugged onto the extender board outside the card cage, making it more easily accessible.
|
|
•
|
To test peripheral cPCI boards
|
|
•
|
Compliant with PICMG 2.0 CompactPCI Specification Rev.3.0
|
|
•
|
cPCI signals from P1 and P2 extended using PCI to PCI Bridge
|
|
•
|
Based on the Intel PCI-to-PCI bridge fw21154be
|
|
•
|
Bus frequency: 33MHz (standard) or 66MHz
|
|
•
|
All pins from P3, P4 and P5 are routed 1:1
|
|
•
|
Signals can be individually switched on/off via SMD switches
|
|
•
|
Characteristic impedance 65 Ohm +/-10%
|
|
•
|
Handles for insertion/extraction of the daughter card
|
|
•
|
Two test points for each signal
|
|
•
|
Table in Silkscreen showing the mapping of signals
|
|
•
|
Access to GND, +3.3V, +5V, +12V, -12V via fastons
|
|
•
|
VI/O voltage selectable between +3.3 and +5V
|
|
|
|
|
|
|
|
|
|
|
|
|
|